Musky America Magazine March 2024 Edition

Placing the # 5 clasp onto one of the eyelets, hold the eyelet and clasp with the round nose pliers. Position the DuBro tool per the tool instructions and close the loop by twisting the end of the wire. Do the same with the other eyelet installing the swivel rather than a clasp. Trim any excess tag wire and you now have a finished 7 inch leader (See Below). You have now made your first leader using the 7 inch section of your leader board. The rest is easy. Just measure 9 inches from the last large nail you put in the leader board and then add the finishing nail just as with the 7 inch section of the leader board. Do the same for the 11 inch leader section of the leader board.

RkJQdWJsaXNoZXIy ODA4MA==